Milwaukee 12 V Drill Driver Impact Driver Combo Kit Review

Milwaukee M12 Fuel Touch on Driver Dominates Performance Testing

After testing more than 30 of the all-time impact drivers, the Milwaukee M12 Fuel impact driver was the highest performer in the 12V class. After all, Milwaukee is known for having a actually deep 12V line that draws comparisons to compact 18V operation.

Milwaukee M12 Fuel Impact Driver Test Results

• 12V Ranking: 1st place out of 9
• Speed Under Load: 397 RPM (1st identify)
• Fastening Torque: 804 in-lbs (1st place)
• Nut-Busting Torque: 1680 in-lbs (necktie, 1st place)
• Decibels Under Load: 100 dB(A) (tie, seventh place)
• Weight: 1.8 pounds bare, two.two pounds with bombardment (3rd place)
• Footprint: v.2″ caput length, 6.8″ height (fourth identify)
• Feature Ready: Highlighted by a 3-speed brushless motor with self-tapping screw way(1st place)
• Value: $119 blank, $169 with 2 compact batteries(6th identify)

Takeaway

Dominating the performance in the 12V grade is i thing, simply it defeats the benefits of 12V if y'all tin can't keep the tool compact. Milwaukee does a nice task balance the two with meridian cease performance and mid-pack size and weight. It gets some help from its recent redesign that drops virtually an inch off the length while adding 100 in-lbs of torque to the previous model.

Results as of February 11, 2019. Check out our All-time 12V Impact Driver page for the latest updates.[/alert]

Milwaukee M12 Fuel Touch on Commuter Performance

Performance is the well-nigh of import aspect of your affect driver. You tin use the most comfy, least expensive, feature-rich impact driver on the market, but if it can't get that fastener attached, it doesn't do you a whole lot of skillful, does information technology?

On paper, the Milwaukee M12 Fuel impact commuter can generate a no-load speed of 3,300 RPM and iv,000 IPM. It also produces a max i,300 in-lbs of torque. That's peachy in a lab, but the real world doesn't deal with no-load speed.

Take a await at the ins and outs of how nosotros tested during our all-time impact commuter comparison.

Speed Under Load

We glued upwards layers of OSB subfloor and drove 1/4″ diameter ledger screws into it. Nosotros clocked the Milwaukee M12 at 397 RPM, which places it at the top of our charts for speed testing. Incidentally, the next all-time finisher is the Bosch PS42 – more 100 RPM behind.

We like to run across our Pro 18V models striking 400 RPM minimum and several models we've tested don't. That means the Milwaukee 2553 legitimately outperforms some 18V models in this test and information technology's conceivable to use it occasionally on timber screw and some lags. I'd still stick with an 18V model if that's a chief application for you, though.

Milwaukee M12 Fuel Impact Driver Torque

Milwaukee's 2553 generates 804 in-lbs of hard fastening torque in our testing. To put into perspective how much more that is, Skil'south 12V brushless sits in 2nd with 700 in-lbs of torque and Hilti sits in 3rd with 431 in-lbs.

We also look at these tools' nut-busting torque by, well, busting nuts loose from Course eight hardened bolts. Here, the Milwaukee 2553 shares the lead Skil at 1680 in-lbs of breakaway torque. Bosch sits alone is 3rd at 1200 in-lbs followed by Hilti at 840 in-lbs before things really taper off.

All of this is to say that in every performance category we tested, the Milwaukee 2553 puts some serious distance on its competition.

Feature Prepare

The Milwaukee 2553 comes with a brushless motor and four driving modes. A lot of the touch on drivers in the 12V class only accept one driving mode and some accept a couple, but this is the but one with 4. These modes include iii unlike speed settings and one self-tapping spiral mode.

Information technology likewise includes a pretty solid LED light beneath the chuck, a belt hook, and a battery ability gauge on the tool. While it doesn't accept bit ejection, the Milwaukee M12 Fuel affect driver does come up with a ane-handed chip change.

• 

• 

One of the great things about a 12V affect commuter is how light and meaty it can get. This one area that the Milwaukee 12V bear on driver steps away from the podium.

Without the battery fastened, this impact driver weighs a cool 1.8 lbs. Hooking upwards the battery only brings it up to 2.2 lbs, holding on to a 3rd place ranking. At this weight, fatigue won't really enter into the picture. That'southward the instance with our entire group that maxes out at 2.7 lbs.

As far every bit the tool's actual footprint goes, it's a little bigger than some. It'southward five.2″ long from tip to tail, and it stands half dozen.8″ tall. This makes it a bit easier to squeeze into those tight corners. It'south good enough for a 4th place ranking with Ridgid taking the top two places thanks to their 12V Palm Commuter and 12V touch on commuter.

This is a large improvement over the 2453, though. The height is roughly the same, but it drops nearly an inch (0.ix″) off the length.

Comfort goes a long manner too, and Milwaukee does a actually good chore at balancing the tool's weight. The rubbery grip feels comfortable and secure, while the handle has been molded to fit the shape of your hand.

As far as how this measures up against other tools in our shootout, the Milwaukee 12V Fuel impact driver finished 4th overall for its footprint.

Value

We see a large departure betwixt cost and value. So, when nosotros tell you that the Milwaukee M12 Fuel Impact Driver kit is the most expensive we looked at and that it nevertheless presents a solid value, what we mean is that you're getting a lot of bang for your cadet.

Considering that this tool so far ahead of the pack in performance, leads in its feature gear up, comes with a couple of batteries, and has a 5-year tool/2-year bombardment warranty, $169 for the kit doesn't sink its value.

There's as well the option of picking up the two-tool combo kit. It comes with the impact driver, plus the M12 Fuel hammer drill, a couple of batteries, and the charger for $229.

The Bottom Line

Dominating the performance in the 12V class is one matter, but it defeats the benefits of 12V if you tin can't keep the tool compact. Milwaukee does a nice job residuum the 2 with top-end operation and mid-pack size and weight. Information technology gets some help from its recent redesign that drops nearly an inch off the length while adding 100 in-lbs of torque to the previous model.

Milwaukee 2553-22 Specs

• Model: Milwaukee 2553-22
• Power source: Cordless
• No Load Speed: three,300 RPM
• Maximum Torque: 1,300 in-lbs.
• Touch Rate: iv,000 IPM
• Blank Weight: ane.8 lbs
• Weight with Battery: two.i lbs
• Length: 5.ane″
• Warranty: 5 years (tool), 2 years (battery)
• Price: $154.59

loyprand2000.blogspot.com

Source: https://www.protoolreviews.com/tools/power/cordless/drills-drivers-cordless/milwaukee-m12-fuel-impact-driver-review/43159/

Share this post